Small Water Chiller

FEATURES

STRUCTURE

Water cooled scroll chiller Panels and frame are made from galvanized steel protected with polyester powder painting to ensure total resistance to atmospheric agents.

HERMETIC COMPRESSORS

Single phase type (mod. 6.5÷8) and 3-phase (mod.10÷50) scroll type compressors, with built-in thermal overload cut-out and crankcase heater, mounted on rubber vibration dampers. 

EVAPORATOR

Water to water chiller High efficiency tube in tube heat exchanger(mod.6.5÷50), shell and tube heat exchanger (mod.65÷210), factory insulated with flexible close cell material.

CONDENSER

Box type water chiller High efficiency tube in tube heat exchanger(mod.6.5÷50), shell and tube heat exchanger (mod.65÷210), factory insulated with flexible close cell material.

REFRIGERANT CIRCUIT

Small size water R134A chiller  Copper tube connection with charge valves, filter, thermostatic expansion valve, gas-liquid separator, high pressure switch and low pressure switch.

The heat pump units are complete also with 4-way valve and one way valve.

HYDRAULIC CIRCUIT

No build in water circuit as standard.

ELECTRIC PANEL

Consists of:

Compressor contactor,

Compressor protection breaker,

Microprocessor with function display.

OPTIONAL

Sight glass which must be installed in factory,

Source side water flow switch,

Source side water pump,

Anti-vibration rubber,

Metallic filter for the water circuit.

Heat recovery as optional

Build in water circuit

Modular type

NOMENCLATURE

AC+GSHP  10  T   C   F  H  G
Water source heat pump  Model Ž Heat exchanger: T: tube in tube type B: plate type D: Coaxial type	Refrigerant type --: R22 A: R410a B: R134a C: R407c D: R290	Unit type: F: heat pump L: cooling only R: heating only S: Hot water	Heat recovery function: --: Standard version     H: with partial heat recovery Water pump:     G: Source side F: User side Q: with total heat recovery	Water pump:     G: Source side F: User side

TECHNICAL DATA for Tube in Tube heat exchanger

Performance values refer to the following conditions:

Cooling capacity: Source side water inlet/outlet temperature 18ºC/29ºC, user side water inlet/outlet temperature12ºC/7ºC.

Heating capacity: Source side water inlet temperature 15ºC, user side water inlet temperature 40ºC.

Sound pressure measured at a distance of1mand a height of1.5 mabove the ground in a dear field.

OVERALL DIMENSIONS

TECHNICAL DATA for Shell and Tube heat exchanger

Performance values refer to the following conditions:

Cooling capacity: Source side water inlet/outlet temperature 18ºC/29ºC, user side water inlet/outlet temperature12ºC/7ºC.

Heating capacity: Source side water inlet temperature 15ºC, user side water inlet temperature 40ºC.

Sound pressure measured at a distance of1mand a height of1.5 mabove the ground in a dear field.

OVERALL DIMENSIONS

small water chiller