Chiller cooling system Water cooled Modular Chiller

FEATURES of Chiller cooling system

80/120/160 modular water chiller The master module can work independently or together with up to 7 slave modules, flexible design, stable performance, easy maintenance.

 

Reusable: using solar energy stored in earth as cooling & heating source.

 

Panels and frame are made from galvanized steel protected with polyester powder painting to ensure total resistance to atmospheric agents.

Water cooled modular chiller 3-phase scroll type compressor, with built-in thermal overload cut-out and crankcase heater, mounted on rubber vibration dampers.

 

Scroll water chiller Shall and tube type evaporator, factory insulated with flexible close cell material.

Shall and tube dry expansion type condenser, factory insulated with flexible close cell material.

R407C modular chiller The refrigerant circuit is complete with filter drier, direct expansion valve, high and low pressure switch.

Packaged water chiller Acting as multi-function unit such as cooling, heating, with heat recovery function producing hot water for domestic use.

LCD display as standard

Automatic operation dramatically reducing maintenance cost thanks to reliable microprocessor system.

Water to water chiller Wide application as hotel, apartment, villa, factory, shopping center, office building, school, etc.

ELECTRIC PANEL

consists of:

Compressor breaker,

Compressor contactor

Phase sequence relay

Control circuit breaker

Microprocessor with function display

OPTIONAL

Desuperheater as optional

Electronic controller with BMS system.

NOMENCLATURE

AC+LS  QW  90  K  C   H   T  Z  LN
Water cooled water chiller Scroll compressor ŽModel  K: Modular unit  Refrigerant type --: R22 C: R407c     B: R134a	Heat Recovery:     --: standard unit H: partial heat recovery Q: total heat recovery ’ Heat exchanger type:     --: shell-tube     T: tube in tube	Module type Z: master module --: slave module ” Low noise design   --: Standard   LN: Low noise cabinet

TECHNICAL DATA Chiller cooling system

Performance values refer to the following conditions:

* Source side water inlet/outlet temperature 18ºC/29ºC, user side water inlet/outlet temperature 12ºC/7ºC, for Underground water

   Source side water inlet/outlet temperature 25ºC/30ºC, user side water inlet/outlet temperature 12ºC/7ºC, for Underground water loops

** Source side water inlet/outlet temperature 15ºC/8ºC, user side water inlet/outlet temperature 40ºC/45ºC, for Underground water

     Source side water inlet/outlet temperature 8ºC/4ºC, user side water inlet/outlet temperature 40ºC/45ºC, for Underground water loops

*** Sound pressure measured at a distance of1mand a height of1.5 mabove the ground in a dear field.

OVERALL DIMENSIONS

	80KZ	120KZ	160KZ
A	2200	2200	2835
B	1630	1630	2180
D	940	985	985
E	1380	1380	1400
F	480	480	560
G	1290	1290	1760
H	380	380	460